Chimney Sweeping & Repair in Milwaukee, WI

Winters are long: the Milwaukee Mitchell Ap station averages 123 nights a year at or below 32°F and 52 at or below 20°F.^1,2 In long winters, chimneys work hard and masonry sees many freeze-thaw cycles; annual inspection and a sound cap and crown are the maintenance baseline. The median home in the city of Milwaukee was built in 1953, older than the U.S. median of 1980 and older than the Wisconsin median of 1975.³ Older masonry chimneys may be unlined or have cracked clay tile liners; a Level 2 camera inspection is the standard way to confirm the liner before the first fire of the season.

The stock is old by national standards: 84% of Milwaukee's housing units were built before 1980 (U.S. 50%), and only 4% since 2010.³ Pre-1940 chimneys were often built without a liner at all; relining with stainless is the usual remedy when the scan shows bare brick. Annual precipitation is about 35 inches, with 7 days a year bringing an inch or more.^1,2 Snowfall averages about 49 inches a year.^1,2 Snow sitting against the stack keeps masonry wet for weeks; a cap, a sound crown and sealed counterflashing are what keep it out.

Heating dominates the year: about 6,450 heating degree days against 780 cooling degree days (base 65°F).^1,2 In a heating-led climate, insulation and air sealing carry most of the energy-code weight for any work that opens the envelope. Building permits in Milwaukee are normally issued by the city building department.^4,5 Where a liner or rebuild needs a permit, the contractor files it with the city before work starts.